Click image to view full size image
Material: NBR, FKM, HNBR, MVQ, EPDM, etc.
Specification: wire diameter 0.4~0.9mm.
Scope of application: clocks, buttons, hardware screws, small electronic rubber accessories, etc.
Product Details
Installation housings
The installation housings (grooves) for O-rings should if possible be produced with right angles and should be processed with care. Burrs, scratches and notches should be avoided. The dimensions for the required depth and width of the groove depend on the particular application and cross-section. You will find recommendations for construction and dimension tables in our O-Ring Catalogue. To facilitate installation, a variety of surface coatings can be supplied on application.
Selection and design
To ensure sound sealing effect, O-rings should be selected to offer the largest possible cross-section. The hardness of the O-ring material selected depends on the pressure, gap widths, type of sealing (static/dynamic) and the surface quality of the machine parts. For standard applications we recommend a material hardness of 70 Shore A. Careful consideration should also be given to the correct compression, elongation or compaction and the degree to which the groove in the installation housing is filled.
Basic Description
Sealing ring specification: 2.4*0.8*0.8/3*1.4*0.8/3.2*1.6*0.8
Product Features
Our factory has independent mold design and manufacturing capabilities, as well as the research and development capabilities of rubber raw material formulations. Due to the small diameter of the small O-ring, the processing difficulty is very high, and the quality control requirements are high. Our company has done a lot of work for such products, and can customize ultra-precision O-ring parts that meet the requirements for customers with true roundness.
Applicable Scope
Clocks, buttons, hardware screws, small electronic rubber accessories, etc.
Testing and Certification
Pass REACH, ROHS certification
We are a professional manufacturer of FKM Rubber O-Ring. For more information on O-rings and other seals, please call or contact us immediately.
http://www.yuefeng-seal.com/